Dryer Repair Johnson City TN | Same Day Service | (423) 600-8885
Princeton Square, 206 Princeton Rd, Johnson City, TN 37601
Mon-Fri 7am-7pm  |  Sat 8am-5pm
Call Now: (423) 600-8885

Dryer Repair in Johnson City, TN

Dryer not heating, taking too long, or making strange noises? We fix all dryer brands and models with same day service available across the Tri-Cities area.

Licensed & Insured
⏱️ Same Day Service
💰 Free Estimates
Gas & Electric Dryers
🔧 Parts & Labor Warranty

Fast, Reliable Dryer Repair in Johnson City TN

A broken dryer is more than just an inconvenience. Wet clothes piling up, trips to the laundromat, and the worry about a potential fire hazard from a clogged vent all add up fast. We get your dryer fixed quickly so you can get back to normal.

We repair both gas and electric dryers of all brands and models across Johnson City and the Tri-Cities area. Our technicians carry the most commonly needed dryer parts on the truck, so most repairs get done in a single visit the same day you call.

Whether your dryer stopped heating, is making a loud squealing noise, or just stopped turning on, we diagnose the problem accurately and give you a clear price before touching anything. No surprises, no runaround.

Call (423) 600-8885 for a Free Estimate
Dryer repair technician in Johnson City TN

Dryer Problems We Fix in Johnson City

From no heat to loud noises, we handle all common dryer issues fast with same day service available.

🔥

Dryer Not Heating

On electric dryers usually a burned out heating element or blown thermal fuse. On gas dryers usually the igniter, flame sensor, or gas valve coils. We carry parts for both on the truck.

Takes Too Long to Dry

Almost always caused by a clogged dryer vent restricting airflow. Also check for a failing heating element or worn drum seal. We inspect the full system including the vent line.

🔊

Squeaking or Squealing

Worn drum support rollers, a worn idler pulley, or a worn drum felt seal are the usual culprits. All normal wear parts we carry on the truck for most major brands.

💥

Loud Banging or Thumping

Usually caused by a broken or worn drive belt, a damaged drum roller, or an object caught in the drum. We inspect and replace the worn parts so the noise stops for good.

Dryer Not Starting

Could be a failed door switch, blown thermal fuse, bad start switch, or a control board issue. We troubleshoot the full electrical system to find the exact cause fast.

🌀

Drum Not Spinning

A broken drive belt is the most common cause of a drum that will not turn. The motor runs but the drum stays still. Drive belt replacement is one of our most common same day repairs.

🌡️

Overheating

A dryer that gets too hot is almost always caused by a blocked vent. This is also a fire hazard. We clean and inspect the vent system and replace any failed thermostats or thermal fuses.

💨

Dryer Vent Blocked

A clogged dryer vent causes poor drying performance, overheating, and is a major fire risk. We clean and inspect the full vent line from the dryer to the outside vent cap.

📱

Error Codes on Display

Modern dryers show error codes when something is wrong. We read and diagnose all error codes across all brands and fix the underlying problem, not just clear the code.

All Major Dryer Brands Repaired

We repair all brands of gas and electric dryers in Johnson City and the Tri-Cities area.

Whirlpool Maytag Samsung LG GE Frigidaire Kenmore Amana Speed Queen Bosch KitchenAid Electrolux Miele Hotpoint Roper

Do not see your brand? Call us anyway. We repair most brands not listed here too.

How Our Dryer Repair Service Works

Simple process. No surprises. Most repairs done same day.

1

Call Us for a Free Estimate

Call (423) 600-8885 and describe the problem. We schedule a time that works for you, often the same day.

2

We Diagnose and Give You a Price

Our technician inspects your dryer, identifies the exact problem, and gives you a clear upfront price before any work begins. No surprises.

3

Repair Done, Backed by Warranty

Once you approve we fix it on the spot in most cases. All repairs come with a parts and labor warranty for your peace of mind.

Dryer Repair in Johnson City TN: What You Need to Know

Dryers are one of the most repairable appliances in your home. Most dryer problems come down to a handful of common parts that wear out over time. A heating element, a drive belt, a set of drum rollers. These are straightforward repairs that do not require replacing the whole machine. We stock the most common parts for the most popular brands so we can handle the repair in one visit without making you wait.

We serve Johnson City and the surrounding Tri-Cities area including Kingsport, Bristol, Elizabethton, and Greeneville. Same day service is available for most calls received before noon. Call us in the morning and you could have your dryer running again before dinner.

Gas Dryer Repair vs Electric Dryer Repair

Gas and electric dryers share the same basic mechanical parts but have different heating systems. Knowing which type you have helps us show up prepared.

Electric dryer repairs most commonly involve the heating element, thermal fuse, cycling thermostat, or high-limit thermostat. When an electric dryer runs but produces no heat, the heating element is the first thing we check. A blown thermal fuse is also very common, and it often means the dryer vent is clogged and causing the unit to overheat repeatedly.

Gas dryer repairs involve the igniter, flame sensor, gas valve coils, and radiant sensor. When a gas dryer runs but the drum stays cold, the igniter or flame sensor is usually the cause. Gas dryer parts are generally less expensive than electric heating elements, which makes gas dryer repairs often more affordable.

We are equipped and trained to safely repair both gas and electric dryers of all brands and models.

How Much Does Dryer Repair Cost in Johnson City TN?

Dryers are among the most affordable appliances to repair. Here is a general breakdown of common dryer repair costs in Johnson City:

  • Service call and diagnosis: $70 to $130
  • Thermal fuse replacement: $90 to $160
  • Drive belt replacement: $100 to $180
  • Heating element replacement (electric): $120 to $220
  • Drum roller replacement: $100 to $200
  • Igniter replacement (gas): $100 to $190
  • Gas valve coil replacement: $120 to $220
  • Idler pulley replacement: $90 to $170
  • Control board replacement: $200 to $380
  • Dryer vent cleaning: $80 to $150

These are general estimates. Exact cost depends on the brand, model, and parts needed. We always give you a clear price before starting work.

Dryer Vent Safety: What You Need to Know

A clogged dryer vent is one of the leading causes of house fires in the United States. When lint builds up in the vent line over time, hot air cannot escape and the dryer overheats. This trips the thermal fuse repeatedly and can eventually start a fire in the vent duct itself.

Signs your dryer vent may need cleaning include clothes taking more than one cycle to dry, the dryer exterior feeling very hot during operation, a burning smell when the dryer runs, and visible lint buildup around the outside vent opening. We recommend having your dryer vent professionally cleaned at least once a year for average households, and more often if you do a lot of laundry.

When we come out for a dryer repair we always check the vent system as part of the service to make sure your home is safe.

Serving Johnson City and the Tri-Cities Area

We provide dryer repair service throughout Johnson City TN and the surrounding communities including Kingsport, Bristol, Elizabethton, Greeneville, Jonesborough, Gray, and the broader Washington County, Sullivan County, and Carter County areas. If you are within about 30 miles of Johnson City, give us a call.

Dryer Repair Questions Answered

Common questions from homeowners in Johnson City and the Tri-Cities area.

How much does dryer repair cost in Johnson City TN?

Dryer repair in Johnson City TN typically costs between $100 and $300 depending on the problem. A service call and diagnosis runs $70 to $130. Common repairs like replacing a heating element, thermostat, or drive belt fall in the $100 to $220 range. More involved repairs like replacing a drum motor or control board can run $200 to $350. We always give you a free estimate before starting any work.

Why is my dryer not heating?

A dryer that runs but produces no heat is one of the most common repair calls we get. On electric dryers the most likely cause is a burned out heating element or a blown thermal fuse. On gas dryers it is usually a faulty igniter, flame sensor, or gas valve coils. A clogged dryer vent can also cause the dryer to overheat and trip the thermal fuse repeatedly. We diagnose the exact cause and fix it the same day in most cases.

Why is my dryer taking too long to dry clothes?

A dryer that takes multiple cycles to dry clothes is almost always caused by a clogged or restricted dryer vent. When the vent is blocked, hot moist air cannot escape and clothes stay damp. Other causes include a partially failed heating element producing low heat, a worn drum seal allowing hot air to escape, or a faulty moisture sensor giving inaccurate readings. We check the full system including the vent line to find the real cause.

Why is my dryer making a squeaking or squealing noise?

Squeaking or squealing from a dryer is almost always caused by worn drum support rollers, a worn drum glide or felt seal, or a worn idler pulley. These are all normal wear parts that wear down over years of use. The good news is all of these are straightforward repairs. We carry drum rollers, idler pulleys, and drum seals for most major brands on the truck so the repair can usually be done same day.

Is it worth repairing a dryer or should I buy a new one?

Dryers are generally one of the most cost effective appliances to repair. Most common dryer repairs cost between $100 and $250, while a new dryer costs $400 to $900 or more. If your dryer is under 10 years old and the repair cost is under half the price of a new one, fixing it almost always makes more financial sense. Our technicians give honest advice on whether repair or replacement is the smarter choice for your specific situation.

Do you repair both gas and electric dryers?

Yes, we repair both gas and electric dryers. Gas and electric dryers have different heating systems but share many of the same mechanical components. Gas dryer repairs involve the igniter, flame sensor, and gas valve coils. Electric dryer repairs typically involve the heating element and thermal fuse. Our technicians are trained and equipped to work on both types safely.

How do I know if my dryer vent needs cleaning?

Signs your dryer vent needs cleaning include clothes taking more than one cycle to dry, the dryer feeling very hot on the outside during operation, a burning or musty smell when the dryer runs, and visible lint buildup around the outside vent cap. A clogged dryer vent is a leading cause of house fires and also wastes energy. We recommend professional vent cleaning at least once a year for average households.

What dryer brands do you repair in Johnson City TN?

We repair all major dryer brands in Johnson City TN including Whirlpool, Maytag, GE, Samsung, LG, Frigidaire, Kenmore, Amana, Speed Queen, Bosch, KitchenAid, Electrolux, and more. We service both standalone dryers and stackable washer dryer combos. If you have a brand not listed here, give us a call and we can confirm if we service it.

Dryer Not Working? Call Us Now.

Same day dryer repair in Johnson City and across the Tri-Cities area. Free estimate before any work starts.

Call Now for Fast Dryer Repair